100LX, 100L emulsifying machine
QBME emulsifying machine series dedicated to laboratory equipment crystal code laboratory or small batch trial operation, the introduction of American technology, combined with independent research and development of the sharp edge cutting technology in shear, dispersing and dissolving, emulsification functions, with high efficiency, fine shearing uniformity, stable operation, turning violent characteristics. Equipment at the same time using digital speed and stepless speed regulation advanced, making operation and maintenance is very convenient. The same type of production and emulsifying machine, also equipped with a round hole, long hole mesh (waist), three different stator, in order to adapt to the different size of the medium viscosity, so the test can be directly amplified to the selection of production characteristics.
100LX+FS type Emulsifying dual-purpose machine is composed of QBME100LX with special dispersion head after derived, inherited the closed 100LX emulsifying machine function, increase the dispersion function of the machine, thus expanding the use of 100 series of laboratory crystal code to reduce user purchase cost. The introduction of American technology, combined with independent research and development of the sharp edge cutting technology in shear, dispersing and dissolving and emulsifying function in one, is a multipurpose device for laboratory shear, dispersion, emulsification, homogenization, mixing the ideal test.
QBME
QBME100LX type emulsifying machine is a closed structure, equipped with a special glass bottle, for the need to seal the media of the shear emulsion dispersion test.
QBME100LX+FS type emulsifying and dispersing machine is a closed structure and a special dispersing head, which can realize the whole function of the emulsifying machine and the dispersing machine by replacing the emulsifying head and the dispersing head. Emulsion or dispersion can be carried out in a sealed glass bottle. Of course, the glass bottle removed, replaced by the appropriate size of the user's own containers, is an open mode of operation. Because the stator head diameter is only 35mm, thus, beaker, flask is small can be used as a homogeneous emulsion container. After calculation, this machine is suitable for the minimum liquid volume is 100mL （Ø70x90）.
100LX+FS产品详细参数
型 号
100LX+FS
项 目
乳化头
分散头
电机功率（w）
400
频 率（Hz）
50
额定电压（V）
220
速度范围（rpm）
0-11000
0-10000
35
30
分散轮40、50
线速度（m/s）
17.3
23、28.8
浸入长度（mm）
>60
>60
适合容积（mL）
100~4000
200~4000
专配密闭玻璃瓶（mL）
1000
适用介质粘度（cp）
<10000
升降高度（cm）
20
工作温度（℃）
<120
调速方式
数显无级
重量（Kg）
25
